Newsflash

Vech's New Tool PDF Print E-mail
Written by BMWVMCA NEWS   
Tuesday, 03 April 2012

     New tool we now have! I had these made. A cool tool for the removal of the rear upper shock caps on /2 bikes.  You install it on the stubborn cap, and use an air impact tool, and ZINGO! the cap comes right off the shock shaft.

     They are in stock.

       

 Tool #034--$35.00--rear upper shock cap removal tool.

 Craig Vechorik

 Bench Mark Works

       One possible improvement would be to turn the threads down to the diameter of the spanner pockets in the cap, or if they are already to size, drill and tap the threaded holes and use larger studs with the ends turned down to size. Otherwise, the threads could damage the pockets.                     ED.

Last Updated ( Friday, 25 January 2013 )
 
< Prev   Next >
© 2019 bmwvmca.org
Joomla! is Free Software released under the GNU/GPL License.