Newsflash

Fenders PDF Print E-mail
Written by BMWVMCA NEWS   
Tuesday, 05 August 2008


Below see photos of a reproduction rear fender for early R51/3 through R67 and R68 models. They are made with ‘five loop’ and ‘three loop’ hinges. R51/2 is also available. Todd Rasmussen has a few extra pieces. Contact him at: 405 769 1179



OVERALL, THESE FENDERS ARE VERY WELL DONE. HOLES FOR THE PILLION, TAIL LIGHT AND MOUNTING TO FRAME NEED TO BE DRILLED. THE DRIVESHAFT CUT OUT IS SPOT WELDED IN PLACE, WHERE AS ON THE ORIGINAL, IT WAS FASTENED WITH THREE MACHINE SCREWS.



UNDERSIDE DETAIL SHOWING TUNNEL AND SPOT WELDED TABS THAT SUPPORT  PILLION MOUNTING.



UNDERSIDE DETAIL SHOWING SPOT WELDS AND RIVITS



‘FIVE LOOP’ HINGE VERSION ‘THREE LOOP’ VERSION IS ALSO AVAILABLE.

Last Updated ( Monday, 08 June 2009 )
 
< Prev   Next >
© 2020 bmwvmca.org
Joomla! is Free Software released under the GNU/GPL License.